← back to home FR

Configure le_dns on Your Router

Protect every device on your network at once

Changing DNS on your router is the most powerful option: every device on your network — phones, laptops, smart TVs, IoT gadgets, guest devices — automatically uses le_dns without any per-device configuration.


Before you start

You need access to your router’s admin interface. Typically:


Generic steps (applies to most routers)

  1. Log into your router admin panel
  2. Find DNS settings — usually under one of:
    • WAN / Internet settings
    • DHCP settings (for distributing DNS to local devices)
    • Advanced → DNS
  3. Replace the existing DNS addresses with:
    • Primary DNS: 51.75.96.82
    • Secondary DNS: 51.89.95.33
    • Tertiary DNS (if supported): 151.115.80.165
  4. Save and apply

Fritz!Box

  1. Open Internet → Account Information → DNS rebind protection (optional, can stay enabled)
  2. Go to Internet → DNS
  3. Select Use other DNSv4 servers
  4. Set Preferred DNSv4 server: 51.75.96.82
  5. Set Alternative DNSv4 server: 51.89.95.33
  6. Click Apply

Livebox (Orange)

  1. Go to Configuration avancée → Réseau → DNS
  2. Replace the ISP DNS entries with:
    • 51.75.96.82
    • 51.89.95.33
  3. Save

Other ISP boxes (SFR, Bouygues, Freebox)

Freebox: Freebox OS → Paramètres de la Freebox → DHCP → DNS

Most ISP boxes have DNS settings under:


A note on encryption

Router-level DNS changes DNS to le_dns, which prevents your ISP from intercepting your queries. However, the connection from your router to le_dns is plain DNS (UDP/TCP port 53) — not encrypted in transit.

For end-to-end encryption, configure DoH or DoT on each device individually. See the DoH setup guide or use the Private DNS setting on Android or a DNS profile on iOS.


Verify it works

From any device on the network, visit dnsleaktest.com. The DNS servers listed should be le_dns. If your ISP’s servers still appear, check that DHCP is distributing the new DNS (you may need to reconnect devices or flush their local DNS cache).